AMC-RF2x2 dual-channel RF card for LTE
Specification:
  • 2 Texas Instruments TMS320C6670 DSPs each with 4 1GHz C66x cores
  • Xilinx Virtex-6 LX240T FPGA (optionally with LX550T)
  • 20gbps Gen2 RapidIO infrastructure between DSPs, FPGA and AMC.4
  • Three SFP sockets to support a CPRI or OBSAI antenna interface
  • Full Gigabit Ethernet infrastructure
  • GPS receiver (option) for timing and frequency synchronisation
  • Single width, full-size AMC card
  • LTE application software available from partners
  • A wideband, highly flexible dual channel RF card in AMC form for LTE and LTE Advanced applications.

    The AMC-RF2x2 is a high performance RF card in an Advanced Mezzanine Card (AMC) form factor.

    The standard hardware provides 2 RF ports supporting both FDD and TDD modes across all the LTE and LTE advanced bands. 1.4MHz through to 40MHz bandwidths are supported and on-board frequency synthesizers can be programmed to 1Hz resolution.

    The RF power is programmable and can be instrumented precisely using the on-board RF power meters. This means that the AMC-RF2x2 is ideal for LTE and LTE Advanced test equipment, demonstrators, trial systems and other high performance applications.
        
    Digital down converter (DDC) and digital up converter (DUC) operations are conducted by integrated firmware within the on-board Xilinx Virtex-6 FPGA.Synchronisation is via front panel SMB connector, backplane or recovered from the CPRI interface.

    Should modifications be required to make this product fit your OEM requirements, CommAgility can support your needs through customisation or providing additional software and firmware.

    To discuss this product in more detail, please email This email address is being protected from spambots. You need JavaScript enabled to view it.